Showing posts with label Jeeps. Show all posts
Showing posts with label Jeeps. Show all posts

Wednesday, March 13, 2019

WINCHING - Choosing the Right Winch and Accessories - Part 2

Winching

Choosing the Right Winch and Accessories

By Jerry Smith

Part 2


In part one of this series, we talked about how to make your electric winch more efficient.  In part 2, we’ll give you some tips on how to choose the right winch for your rig.

One of the first things you need to know about buying a new winch is the loaded weight of your rig as it will generally be out on the trail.  This will include any passengers, a full tank of gas, any tools, camping gear, spare parts, coolers full of ice and food, and anything else you normally will carry.

If you’re really anal about this step, you can find a certified scale at a truck stop or local dump to weigh the vehicle.  Estimating the added weight is not all that hard and you can find the gross vehicle weight in the owner’s manual or sometimes on the driver’s door.

Take the gross weight number you come up with and multiply it by 1.5.  You want a winch that can pull a minimum of 1.5 times the gross vehicle weight or more on a single line pull.

Here is an alternative if your budget is and will be short of what you need for a full-size winch.  Take the gross vehicle weight and divide it by two.  Find a winch that can pull that weight plus a little.  Then outfit it like we showed in part one with the welding cable hot wire and short rope to keep the layers to no more than two.  But don’t stop there.

This winch will pull you out of many places just like you have it now.  But if you’re bogged down in mud or on a hard pull of another kind, you’re going to need some winching know-how and some accessories.  In this instance, at least one snatch block.

As responsible 4-wheelers, we always want to do things with safety being the first order of business.  That requires some gear that did not come with your winch.

Gear like a good way to connect your winch line to a strap or other gear.  That normally will be a D-ring or one of the newer Rope Shackles.  You may get away with carrying only one of these for a while, but if you wheel in difficult situations long, you will require more than just the one.  I have carried a minimum of 4 of these and usually more.

Next, you’ll want a quality snatch block.  Why do I say quality?  I have seen the cheap ones fail and they NEVER fail at a good time… only when you need them most.  I like them rated for at least 4 to 6-times my gross vehicle weight.
That will put one at about 30,000# minimum.  Also, the larger the diameter of the snatch block pulley, the better.  There will be less drop in your line pull with larger pulleys. 

For most of you, one snatch block will be enough.  I carry two or three most of the time and have needed more a couple times.  When you need to change directions of pull more than one direction, you’ll need two most of the time and a third in the odd time.

I have needed three-winches, six snatch blocks, and a bucket of D-rings on each of two recoveries of other vehicles.  Another reason you don’t go wheeling alone.  Being short one D-ring to do a pull is like not having a winch at all.  Don’t be bashful about carrying extras.

Always carry at least a non-kinetic towrope or strap.  You can use it as a tree strap if you don’t carry one, and it becomes a multi-use tool.  I like to have at least a tree strap and one tow rope/strap for the odd time I need the extra length or need to attach to two trees.

Two trees are not out of the question.  I’ve needed to tie the rear of my Jeep to a tree or another vehicle to hold it so I could pull another vehicle on ice or mud several times.

If you use a wire rope winch cable, you’ll want a dampening blanket or coat to place over the cable to absorb the energy it will have should it break.  You do NOT want a winch cable breaking without a dampener.  They have killed and severely hurt people.

Gloves are especially needed with wire rope, but even a synthetic rope will have little skin-snagging objects embedded.  You’ll only want to learn about this once before you will ALWAYS WEAR GLOVES.

Those are some of the minimum accessories you’ll want/need.  We will discuss others in the third part of this series.

Following with the “safety” line of doing things, here are some tips that you’ll want to practice.

Unless you upgrade to some of the more expensive winch accessories, you will have a hook on the end of your winch line.  Do you know how to properly use it??  There IS a right and wrong way you know?

When hooking a winch line with a hook to any kind of anchor point, always, always have the hook pointing UP.  The easy way to remember this is that you “hook up” the winch line.  The hook is almost always your weakest point.  Should it break off, you want to direct the energy down toward the ground.  With the hook in the up position, any energy in that line is going to be directed down.  With the hook down, it directs the energy upward and the line flies around.

When winching, try very hard to have the winching vehicle pointed directly at the anchor or vehicle being pulled.  You do this so the winch line has a better chance of winding in level on the drum.

When you pull from other than a straight line, the winch line will tend to bunch on one side of the drum and eventually it will bind.  You’ll only do this once.  Pulling a bound up winch line back off a drum is not fun.  In severe cases, you may need to hook to another vehicle and have it pull the line free.

Safety wise, you NEVER, EVER step over a winch line under tension.

If you must step over a slack winch line, put one foot over the line on the ground so it cannot suddenly be tensioned and whack you in the crotch. (Think about it)

Learn the correct winching hand signals.  Using universal crane and rigging signals is the best practice. 

Stay clear of the winch line when pulling.  Keep others back farther than the line potentially could fly should it break.  Raising the hood is also a good way to protect the windshield and driver.

Always wear gloves… preferably leather.

Walk around the entire problem before setting up for a winch pull.  Study it from all angles.  Think about how to hook all your accessories… exactly.  Then think about how you expect the winched object to move.  Will it have a driver?  Will it roll freely once off the obstacle?  What is going to stop it?  Is it in park and/or the park brake set?

What will happen if things don’t go as planned?  Plan for that! 

What if the rope breaks?  What if the anchor pulls free?  What if the vehicle won’t budge?  Anticipate every “what if” and a few you didn’t think of.

The owner/driver of the vehicle in trouble has the final decision… ALWAYS.  That doesn’t mean others cannot veto the operation and walk away.  The person with the most to lose must have the final say.  Hold a short planning meeting.  Ask for feedback from others and decide which procedure makes the most sense.  Defer to someone with experience if you can trust them.

I’ve had many, many experiences, but by LISTENING in certain instances, a better plan than my own was used.  Nobody knows it all and you may miss something another sees.

In part 3, we will discuss some accessories to allow your winch to do what it was made for and why you bought it.






Wednesday, November 21, 2018

Winching -- Choosing the Right Winch and Accessories

Winching

Choosing the Right Winch and Accessories

By Jerry Smith

Part 2


In part one of this series, we talked about how to make your electric winch more efficient.  In part 2, we’ll give you some tips on how to choose the right winch for your rig.

One of the first things you need to know about buying a new winch is the loaded weight of your rig as it will generally be out on the trail.  This will include any passengers, a full tank of gas, any tools, camping gear, spare parts, coolers full of ice and food, and anything else you normally will carry.

If you’re really anal about this step, you can find a certified scale at a truck stop or local dump to weigh the vehicle.  Estimating the added weight is not all that hard and you can find the gross vehicle weight in the owner’s manual or sometimes on the driver’s door.

Take the gross weight number you come up with and multiply it by 1.5.  You want a winch that can pull a minimum of 1.5 times the gross vehicle weight or more on a single line pull.

Here is an alternative if your budget is and will be short of what you need for a full-size winch.  Take the gross vehicle weight and divide it by two.  Find a winch that can pull that weight plus a little.  Then outfit it like we showed in part one with the welding cable hot wire and short rope to keep the layers to no more than two.  But don’t stop there.

This winch will pull you out of many places just like you have it now.  But if you’re bogged down in mud or on a hard pull of another kind, you’re going to need some winching know-how and some accessories.  In this instance, at least one snatch block.

As responsible 4-wheelers, we always want to do things with safety being the first order of business.  That requires some gear that did not come with your winch.

Gear like a good way to connect your winch line to a strap or other gear.  That normally will be a D-ring or one of the newer Rope Shackles.  You may get away with carrying only one of these for a while, but if you wheel in difficult situations long, you will require more than just the one.  I have carried at least 4 of these and usually more.

Next, you’ll want a quality snatch block.  Why do I say quality?  I have seen the cheap ones fail and they NEVER fail at a good time… only when you need them most.  I like them rated for at least 4 to 6-times my gross vehicle weight.
That will put one at about 30,000# minimum.  Also, the larger the diameter of the snatch block pulley, the better.  There will be less drop in your line pull with larger pulleys. 

For most of you, one snatch block will be enough.  I carry two or three most of the time and have needed more a couple times.  When you need to change directions of pull more than one direction, you’ll need two most of the time and a third in the odd time.

I have needed three-winches, six snatch blocks, and a bucket of D-rings on each of two recoveries of other vehicles.  Another reason you don’t go wheeling alone.  Being short one D-ring to do a pull is like not having a winch at all.  Don’t be bashful about carrying extras.

Always carry at least a non-kinetic tow rope or strap.  You can use it as a tree strap if you don’t carry one, and it becomes a multi-use tool.  I like to have at least a tree strap and one tow rope/strap for the odd time I need the extra length or need to attach to two trees.

Two trees are not out of the question.  I’ve needed to tie the rear of my Jeep to a tree or vehicle to hold it so I could pull another vehicle on ice or mud several times.

If you use a wire rope winch cable, you’ll want a dampening blanket or coat to place over the cable to absorb the energy it will have should it break.  You do NOT want a winch cable breaking without a dampener.  They have killed and severely hurt people.

Gloves are especially needed with wire rope, but even a synthetic rope will have little skin-snagging objects embedded.  You’ll only want to learn about this once before you will ALWAYS WEAR GLOVES.

Those are some of the minimum accessories you’ll want/need.  We will discuss others in the third part of this series.

Following with the “safety” line of doing things, here are some tips that you’ll want to practice.

Unless you upgrade to some of the more expensive winch accessories, you will have a hook on the end of your winch line.  Do you know how to properly use it??  There IS a right and wrong way you know?

When hooking a winch line with a hook to any kind of anchor point, always, always have the hook pointing UP.  The easy way to remember this is that you “hook up” the winch line.  The hook is almost always your weakest point.  Should it break off, you want to direct the energy down toward the ground.  With the hook in the up position, any energy in that line is going to be directed down.  With the hook down, it directs the energy upward and the line flies around.

When winching, try very hard to have the winching vehicle pointed directly at the anchor or vehicle being pulled.  You do this so the winch line has a better chance of winding in level on the drum.

When you pull from other than a straight line, the winch line will tend to bunch on one side of the drum and eventually it will bind.  You’ll only do this once.  Pulling a bound up winch line back off a drum is not fun.  In severe cases, you may need to hook to another vehicle and have it pull the line free.

Safety wise, you NEVER, EVER step over a winch line under tension.

If you must step over a slack winch line, put one foot over the line on the ground so it cannot suddenly be tensioned and whack you in the crotch. (think about it)

Learn the correct winching hand signals.  Using the universal crane and rigging signals is the best practice. 

Stay clear of the winch line when pulling.  Keep others back farther than the line potentially could fly should it break.  Raising the hood is also a good way to protect the windshield and driver.

Always wear gloves… preferably leather.

Walk around the entire problem before setting up for a winch pull.  Study it from all angles.  Think about how to hook all your accessories… exactly.  Then think about how you expect the winched object to move.  Will it have a driver?  Will it roll freely once off the obstacle?  What is going to stop it?  Is it in park and/or the park brake set?

What will happen if things don’t go as planned?  Plan for that! 

What if the rope breaks?  What if the anchor pulls free?  What if the vehicle won’t budge?  Anticipate every “what if” and a few you didn’t think of.

The owner/driver of the vehicle in trouble has the final decision… ALWAYS.  That doesn’t mean others cannot veto the operation and walk away.  The person with the most to lose must have the final say.  Hold a short planning meeting.  Ask for feedback from others and decide which procedure makes the most sense.  Defer to someone with experience if you can trust them.

I’ve had many, many experiences, but by LISTENING in certain instances, a better plan than my own was used.  Nobody knows it all and you may miss something another sees.

In part 3, we will discuss some accessories to allow your winch to do what it was made for and why you bought it.






Friday, November 1, 2013

Truck or Treat and 16 Road to 21 Road




Truck or Treat and 16 Road to 21 Road

By Jerry Smith

October 26, 2013

No, you read it right.  “Truck or Treat” is an annual event put on in Fruita, CO where trucks, cranes, emergency vehicles, and tractors are the featured items that families (primarily the kids) come to see and “experience”.

No fun could be found in "Driving a Jeep"

What kid wouldn’t want to climb into the driver seat and pull the cord on an air horn in a class 8 truck? 

"Tooting" an air horn

Or they can go into the back of an ambulance, sit in the backseat of a police car, play in a cattle hauler trailer -- (no Bull Shtuff) or see one of the airport fire trucks up close.

Two "Desperadoes" 

Truck cranes with their booms up, a Grand Valley Power “bucket truck” showing the heights they may go to, and City of Fruita trucks were all on display.  Even school busses could be gone through.

"Little Farmers" 

Add some Halloween candy and how can you go wrong if you are young?

Well, this year the Grand Mesa Jeep Club, Colorado’s 2013 “Jeep Club of the Year”, took over nearly one city block displaying Jeeps and buggies and offering the kids candy as well.  It was an awesome sight.

The Grand Mesa Jeep Club at "Truck or Treat"

Kids, candy, and 4-wheelers 

16 Road to Upper 21 Road

With all the excitement of the Truck or Treat, one would think that would conclude the Saturday festivities… but that would be wrong. The 2013 Colorado “Club of the Year” hates to waste a good opportunity to go into the great American BackCountry.

A short trip into the Bookcliffs north of Grand Junction had been planned.

The Bookcliffs are a land of strange looking desert mountains topped with cliffs that resemble a shelf of books from a distance.  Nearly 200-miles long, the Bookcliffs begin in the northern De Beque Canyon and run through the Grand Valley following the I-70 corridor west to Green River, Utah where they turn north to Price, Utah.

Several dark canyons cut through the face of the Bookcliffs, some with large “bowl” watersheds hidden from view.  These “bowls” are homes to several species of wildlife including; mountain lions, bears, bobcats, coyotes, mule deer, pronghorn antelope, wild horses, bighorn sheep, and bison.

Three of "Red Jeeps" in Coal Gulch

Mainly due to the existence of great quantities of fossil fuels like coal and natural gas, many roads enter into these canyons and up on the ridges providing great exploration of the area in a Jeep or other 4x4.

Taking 16 Road north will eventually bring you into the Big Salt Wash as it exits the BookCliffs.  Further up the wash the road forks, and as you who are familiar with this writers’ practices, “when you come to a fork in the road, Take It!

“Right turn Clyde.”  

Soon we were skirting the end of the ridge that is the front of the BookCliffs and entered Coal Gulch that is directly behind this ridge. 

About halfway along the canyon road, Aaron’s YJ developed fuel delivery problems.  As tail gunner, I stopped to see if there was anything we could do to get them up and running. 

After a bit, he got it to run just well enough to turn around and head for town.  We would later hear that they were still running, though weakly, as Zane and Dale passed them on their way to catch-up to the group.

The road winds along the bottom of the gulch for miles before offering another fork in the road.

Technically, this fork is the beginning of a loop that starts and ends here, but we took the steeper road up onto Ross Ridge.  Several gas wells and their facilities dot the area with pads and short spur roads to each of them.

Sometimes we shift into "2-foot drive"

Following one such road, we came near the southern end of Ross Ridge overlooking Hunter Canyon… better known as 21 Road to our group.

21 Road is a nationally known “extreme trail” that draws people from all over the country to Grand Junction to try their buggies and driving skills. 

21 Road has a reputation for having flash floods that literally alter the trail from time to time.  This potentially makes it an unknown and different challenge every time you run it.  Nearly from the mouth of Hunter Canyon you are presented with one obstacle after another that will challenge you and your rig.

21 Road is known for many “rescue runs” to either bring needed parts to do trail repairs or for bringing a broken rig out by strap(s). 

People try to do this trail in stock or near stock Jeep Rubicons.  Many make the trip in and back out with big smiles and great pride… until they find bent axles, twisted frames, and “rock rash” were the ultimate outcomes.  Sometimes, the “automatic reject feature” of a trail is slow to materialize.

Three of these Rubicons that we know of were replaced not long after their experience on 21 Road.  The cost of repairing them was much too high to justify.

Most of our group hiked up to the overlook on the point of Ross Ridge where you look out over the Grand Valley.  Unfortunately, the air quality was rather poor spoiling the view.

Returning from a hike on Ross Ridge 

After turning around 14-rigs, we followed the road that drops you down into the upper end of Hunter Canyon up stream of the most challenging extreme obstacles. 

The steep road presents very sharp hairpin turns that were fairly challenging and fun.  Two of the hairpins were tight enough that even CJ7s had to back-up for a second attempt to make the turn.  Many fear turns like these while others approach them as just another “bump in the road”.

Sharp "Hair-pin" turns have you meeting those ahead of you. 

Not far from reaching the canyon bottom we found a long, wide, and flat spot that made for a good “Kodak Moment”.  Even with an extreme wide-angle lens, we had too many rigs parked side-by-side to get all in the one shot and not run the far end into oblivion. 

The Grand Mesa Jeep Club in Hunter Canyon (21 Road) 

From this parking area, most of the group walked to the overlook of the extreme obstacles down stream.  This view is quite awesome with no buggies in sight.  With one or more buggies in these boulders, it is hard to understand how they do what they do.

GMJC members looking at the upper extreme obstacles of 21 Road

Along the way back to the parking area, some were walking up the wash bottom when we encountered lion tracks.  These appeared to be from a medium size cat and became the discussion point for a while.

Sighting bear tracks in this canyon is fairly common.  Most of the Hunter Canyon area is quite steep and animals will use the road in the bottom as they move through.

Exiting the backcountry, it was decided that many of us would meet at “Munchies” in Fruita for dinner. 

Picturesque and steep canyon walls of Hunter Canyon

Not long thereafter, several of us were enjoying some good food and even better camaraderie.  It’s no wonder that the Grand Mesa Jeep Club is also the Colorado 2013 “Club of the Year”.

This turned into a really good day of Jeeping and showing community support.

And of course one last thought to ponder;  “When you come to a fork in the road… Take it!!

Happy Trails.


Copyright Happy Trails 2013.  All rights reserved.