Showing posts with label Jeep. Show all posts
Showing posts with label Jeep. Show all posts

Monday, June 24, 2019

The Sheep Creek Jeep Trail


The Sheep Creek Jeep Trail

By Jerry Smith


Not long after we moved to Grand Junction, Colorado in '85, I began exploring area Jeep trails in my ’73 CJ5 (Old Blue).  As a traveling salesman at the time, my time off from work was extremely rare and valuable.

New to Grand Junction (GJT) and seldom home, I had nearly no local friends to find out about the area.  The answer was to take a map of the area and draw a 50-mile radius circle around GJT and go drive ALL Jeep trails within that circle.

It took till about 2009 to be able to say I accomplished that goal and then a little, but it’s safe to say that at one time or another, I have traveled 98% of all Jeep trails in that circle and many beyond.

During that time frame, we (Old Blue, Happy Trails [my ’06 Rubicon] and I) managed to find some trails in need of some TLC.  Trails that Mother Nature had closed for one reason or another were not to be ignored like most people do.  In my younger and healthier years, when an impassable obstacle presented on a Jeep trail, we simply removed or repaired it. 

To me, THAT is just part of the Jeeping experience.  You see a problem and remedy it.  Overcoming obstacles is part of the fun.  Opening a new trail or reopening an old trail is something few of us ever have the pleasure of… and yes, it definitely is a pleasure.  But you must find the opportunity to do it!

Exploring every sidetrack is the way of finding old and new opportunities.  They are out there.  If nothing else, look at the trails that have been closed by land management.  There ARE possibilities of reopening them if you get creative and solve the problems that caused the closure in the first place.

The first trail with that kind of show-stopping problems we worked on was the Pace Lake road.  The bottom of the road showed lots of erosion damage.  Tons of rock falls littered the road.  Some required removal to get by, so we rolled them into some of the deep “V” channels cut into the lower side of the road to slow the erosion.
Happy Trails on Pace Lake
Part of the trail goes through an old burn and several of the old dead snags had blown down over the road.  The tracks in the trail were common.  People would drive up to the first tree blocking the road and turn around.  Between a hand saw and the winch, we moved several trees to get to the first main obstacle.

This obstacle turned out to be a 3-foot wide gash snaking its way down the road about 3-feet deep and 75-yards long.  Trying to straddle the trench only resulted in the first body damage to Happy Trails.  Now it was a working Jeep… not a pleasure Jeep.

Before I worked on the ditch, there was a short walk up the trail to make sure all that work would be worth the effort.  From that walk, I knew there was a big rock fall not far up the trail, but it looked like something we could get around.

So… for the next few hours, I threw everything I could find in that ditch.  Trees, limbs, rocks, dirt, and sweat mostly filled it in.  There was some REAL satisfaction when we drove the full length of that thing!

At the big rock fall, taking a turn around the first kitchen table-size rock, we started to climb the high-side bank of the road to evade another large boulder.  That would have worked well except the rear slid over into the boulder we were trying to avoid and broke the plastic wheel cap (the second damage to Happy Trails) on the right rear.

After a few more trees, we finally reached the top and end of the Pace Lake trail.  The lake is on the Utah side of the border, which is on the wrong side of the fence to the JB Ranch.  The JB Ranch has an agreement with the Fish and Wildlife as a private hunting preserve and they are adamant about trespassers.

** As a side note, we are working with the USFS, BLM, and a private landowner to connect the top of the Pace Lake trail to another trail to make a loop trail.  This is going through the Manti-La Sal Forest Planning presently. See – opportunities!!  ** 

Next came the Calamity Mesa Loop Trail.  This one had been closed for an estimated 25+ years.  Calamity Mesa took some help from two Jeep Clubs to officially open the first half of the trail.  The second half was mostly just myself again.  The Calamity Mesa Loop Trail is a 19-mile loop from the trailhead to the end.  If you count the mile from the end to the trailhead, it’s 20-miles.
The Twisted Drop obstacle winds up your suspension.

Calamity Mesa also has one other smaller 5-mile loop and another trail on top of the mesa from the airstrip to an intersection with the big loop that we reopened.  There is a library full of uranium mining history in the area and some drop dead beautiful scenery.
Narrow shelf roads sometimes scare people.

 Next, we found Flat Top Mesa closed due to two monstrous rocks blocking the road.  This one took some extreme nerve to drive past the second rock.  Your paint was less than 1” from being removed by the rock because you tipped into the rock as you passed it.  Those were some intense moments the first few times we drove this trail alone. 

People have elected to pass driving their pretty paint jobs through this on the two trips we have lead up this trail.

Next was the Coon Hollow Jeep Trail.  This was marked on BLM maps as a “Jeep trail”, but it had not been used by full-size vehicles for many years and had grown in tight to ATV width with four-foot tall sagebrush on both sides and had some deep washes to deal with.  It took a lot of work to reopen Coon Hollow.

Coon Hollow has some difficult crawls

 When we did the work, the area was still managed as “open” to cross country travel, so what we did was legal for you who are touchy about such things.  We created bypasses of two washouts of the trail and trimmed and trampled miles of the tall sagebrush to reestablish a full-width trail again.

Coon Hollow has become another “highlight” trail for our annual Rock Junction event.
The Coon Hollow wash can be tricky

 South Beaver Mesa was next.  This one is a steep, narrow, heavily eroded shelf road down to an old cowboy camp.  The trail is a great Jeep experience for seasoned drivers.  Others may find it frightening.

In 2018 I was contacted by the Paonia Forest Service office and asked it we would come and widen a Jeep trail by cutting miles of heavy overgrown brush back.  It took two trips, but we got it done.
So. Beaver Mesa is steep, rocky, and eroded.

 Just counting these trails, that is over 100-miles of Jeep trails that we have been responsible for reopening.  Some we must work on nearly every year just to maintain them.  Sheep Creek is a prime example.

In the fall of 2018, a nasty storm hit the upper region of the Sheep Creek Jeep Trail.  It brought down tons of debris off the mountainside onto the road and severely eroded the road surface.  This is a common occurrence on Sheep Creek.  Once or twice each year this trail is subject to closure by Mother Nature. 

Sometime during the winter of ‘18/’19, more storm damage added to the previous carnage and added a humungous rock (15’ tall and the width of the road) to our problems.  Sheep Creek is part of one of the favorite trips we lead people on for our Rock Junction event.  Having it closed was not going to make some people happy.
Steep and winding is Sheep Cr.

 Because of all the damage and the huge rock, we met with the BLM to discuss what could be done to reopen the trail “legally”.  Our club has a very strong working relationship with the local BLM.  They gave us some parameters to work within to reopen the trail.

Sunday, May 19th began as a workday to reopen the Sheep Creek trail.  We started out with a good-size crew of eager beavers ready to move the world if necessary.  In reality, they turned out to be a worthless bunch that never moved a rock all day.  Not even one shovel full of dirt turned.  It wasn’t their entire fault, though. 

While airing down at the Sheep Creek trailhead, a phone call from Keri informed us that a crawler tractor had already been up the trail and had removed all obstacles.  Work party disaster!

With that news, we lost Jeff and his buggy.  The rest of us decided to run the trail through to Glade Park.  On our way to the top, over the radio comes word that Luke will be riding through Granite Creek where the word is there are “rock falls” near the “homestead”.
The exit from Granite Cr. is a steep, narrow, rocky shelf road

 After a brief stop at the cabin near the top of the Sheep Creek trail, Roger’s freshly “repaired” LS powered JKU shot another code and became questionable, so the Bartons turned around with Dick following and left the mountain (we hope).

Topping the trail, we elected to head for a meeting with Keri somewhere along the trail toward Glade Park.  She couldn’t explain her location, so we were on a search and find mission.  On the radio, we were still hearing bits and pieces of what had been found down on Granite Creek.  The broken radio reception didn’t sound all that bad, so we did a quick turnaround and headed down Lost Horse Canyon on the way to Granite Creek Canyon.

After about 8-miles of travel, we stopped at the “homestead” and glassed a pickup that could be seen on the shelf road exit from the canyon bottom.  Even with drone flyover pictures, the overall predicament with the truck could not be determined, so up the road we went.

Just a short walk around a corner from the pickup was a serious rockfall blocking forward progress.  A quick look and some thoughts about it made me think we “could” move the big rocks enough to pass, but taking the walk around the corner made the effort fade into oblivion.  Not only was there another large rock partially blocking the road, but also a disabled pickup with unbelievable body damage and what appeared to be a broken front axle sat smack in the middle of the road.  Game over!

Back out through Granite Creek Canyon and Lost Horse Canyon to the road to Glade Park.

Overall, it was a good (long) day of Jeeping.  Many in the group saw some new country and trails they had never traveled, so all was not lost.  One of the Rock Junction favorite trails is again useable and we only had one and a half casualties.  I forgot to mention that Dick aired down two tires TOTALLY.  Whoops!!

This should give you some ideas of what can be done for motorized trail access “IF” someone takes the lead and follows through.  Of course, having support from other people makes this happen easier, but that all-important “point man” is VITAL to things like this!  Are YOU that person?

One of the first things you must do is get on a first name basis with local land managers.  Being on their speed dial is even better.  You’ll get better cooperation if they know and trust you.

One last thing… always remember when you come to a fork in the road, Yogi said; “Take it!”  That is the first step to finding opportunities.  

Monday, May 27, 2019

Gaining Jeep Trail Access


Gaining Jeep Trail Access

By Jerry Smith


Not long after we moved to Grand Junction, Colorado, I began exploring area Jeep trails in my ’73 CJ5 (Old Blue).  As a traveling salesman at the time, my time off from work was extremely rare and valuable.

New to Grand Junction (GJT) and seldom home, I had nearly no local friends to find out about the area.  The answer was to take a map of the area and draw a 50-mile radius circle around GJT.  Driving ALL Jeep trails within that circle was now a goal.

It took till about 2009 to be able to say I accomplished that goal and then a little, but it’s safe to say that at one time or another, I have traveled 98% of all Jeep trails in that circle... and believe me, there ARE many.

Image may contain: mountain, grass, sky, plant, outdoor and nature
Happy Trails leading on Sheep Cr.
During that time frame, we (Old Blue, Happy Trails [my ’06 Rubicon] and I) managed to find some trails in need of some TLC.  Trails that Mother Nature had closed for one reason or another were not to be ignored like most people do.  In my younger and healthier years, when an impassable obstacle presented on a Jeep trail, we simply removed or repaired it. 

To me, THAT is just part of the Jeeping experience.  You see a problem and remedy it.  Overcoming obstacles is part of the fun.  Opening a new trail or reopening an old trail is something few of us ever have the pleasure of… and yes, it definitely is a pleasure.  But you must find the opportunity to do it!

Exploring every sidetrack is the way of finding old and new opportunities.  They are out there.  If nothing else, look at the trails that have been closed by land management.  There ARE possibilities of reopening them if you get creative and solve the problems that caused the closure in the first place.

The first trail with that kind of show-stopping problems we worked on was Pace Lake.  Part of the trail goes through an old burn and several of the old dead snags had blown down over the road.  The tracks in the trail were common.  People would drive up to the first tree and turn around.  Between a hand saw and the winch, we moved several trees to get to the first main obstacle.
Off-Camber on Pace Lake
This turned out to be a 3-foot wide gash snaking its way down the road about 3-feet deep and 75-yards long.  Trying to straddle the trench only resulted in the first body damage to Happy Trails.  Now it was a working Jeep… not a pleasure Jeep. (I prefer working Jeeps)


Before I worked on the ditch, there was a short walk up the trail to make sure all that work would be worth the effort.  From that walk, I knew there was a big rock fall not far up the trail, but it looked like something we could get around.

So… for the next few hours, I threw everything I could find in that ditch.  Trees, limbs, rocks, dirt, and sweat mostly filled it in.  There was some REAL satisfaction when we drove the full length of that thing!
On the Pace Lake trail
At the big rock fall, taking a turn around the first kitchen table-size rock, we started to climb the high-side bank of the road to evade another large boulder.  That would have worked well except the rear slid over into the boulder and broke the plastic wheel cap on the right rear. (the second damage to Happy Trails)

After a few more trees, we finally reached the top and end of the Pace Lake trail.  The lake is on the Utah side of the border, which is on the wrong side of the fence to the JB Ranch.  The JB Ranch has an agreement with the Fish and Wildlife as a private hunting preserve and they are adamant about trespassers.

** As a side note, we are working with the USFS, BLM, and a private landowner to connect the top of the Pace Lake trail to another trail to make a loop trail.  This is going through the Manti-La Sal Forest Planning presently. See – opportunities!!  ** 

Next came the Calamity Mesa Loop Trail.  This one had been closed for an estimated 25+ years.  Calamity Mesa took some help from two Jeep Clubs to officially open the first half of the trail.  The second half was mostly just myself again.  The Calamity Mesa Loop Trail is a 19-mile loop from the trailhead to the end.  If you count the mile from the end to the trailhead, it’s 20-miles.

This stump was a tree growing in the middle of the road showing how long the trail had been closed.
Calamity Mesa also has one other smaller 5-mile loop and another trail on top of the mesa from the airstrip to an intersection with the big loop that we reopened.  There is a library full of uranium mining history in the area and some drop dead beautiful scenery.
The Calamity Mesa Loop trail has 10-named obstacles to add some excitement.


Next, we found Flat Top Mesa closed due to two monstrous rocks blocking the road.  This one took some extreme nerve to drive past the second rock.  Your paint was less than 1” from being removed by it as you passed it.  Those were some intense moments the first few times we drove this trail alone.  
That rock on the right is close to the paint.
People have elected to pass driving their pretty paint jobs through this on the two trips we have lead up this trail.

Next was the Coon Hollow Jeep Trail.  This was marked on BLM maps as a “Jeep trail”, but it had not been used by full-size vehicles for many years and had grown in tight to ATV width with four-foot tall sagebrush and had some deep washes to deal with.  It took a lot of work to reopen Coon Hollow.

This wash was "washed out" by a flash flood
 When we did the work, the area was still managed as “open” to cross country travel, so what we did was legal for you who are touchy about such things.  We created bypasses of two washouts of the trail and trimmed and trampled miles of the tall sagebrush to reestablish a full-width trail again.

Coon Hollow has become another “highlight” trail for our annual Rock Junction event.

South Beaver Mesa was next.  This one is a steep, narrow, heavily eroded shelf road down to an old cowboy camp.  The trail is a great Jeep experience for seasoned drivers.  Others may find it frightening.
A dugout at the Cowboy Camp on So. Beaver Mesa
In 2018 I was contacted by the Paonia Forest Service office and asked if we would come and widen a Jeep trail by cutting miles of heavy overgrown brush back.  It took two trips, but we got it done.
Trimming the Lone Cabin Trail
Just counting these trails, that is over 100-miles of Jeep trails that we have been responsible for reopening.  Some we must work on nearly every year just to maintain them.  Sheep Creek is a prime example.

In the fall of 2018, a nasty storm hit the upper region of the Sheep Creek Jeep Trail.  It brought down tons of debris off the mountainside onto the road and severely eroded the road surface.  This is a common occurrence on Sheep Creek.  Once or twice each year this trail is subject to closure by Mother Nature. 

Sometime during the winter of ‘08/’09, more storm damage added to the previous carnage and added a humungous rock (15’ tall and the width of the road) to our problems.  Sheep Creek is part of one of the favorite trips we lead people on for our Rock Junction event.  Having it closed was not going to make some people happy.
This rock blocked Sheep Creek
Because of all the damage and the huge rock, we met with the BLM to discuss what could be done to reopen the trail “legally”.  Our club has a very strong working relationship with the local BLM.  They gave us some parameters to work within to open the trail.

Sunday, May 19th began as a workday to reopen the Sheep Creek trail.  We started out with a good-size crew of eager beavers ready to move the world if necessary.  In reality, they turned out to be a worthless bunch that never moved a rock all day.  Not even one shovel full of dirt turned.  It wasn’t their entire fault, though. 

While airing down at the Sheep Creek trailhead, a phone call from Keri informed us that a crawler tractor had already been up the trail and had removed all obstacles.  Work party disaster!

With that news, we lost Jeff and his buggy.  The rest of us decided to run the trail through to Glade Park.  On our way to the top, over the radio comes word that Luke had ridden through Granite Creek where the word is there are “rock falls” near the “homestead”.

After a brief stop at the cabin near the top of the Sheep Creek trail, Roger’s freshly “repaired” LS powered JKU shot another code and became questionable, so the Bartons turned around with Dick following and left the mountain (we hope).

Topping the trail, we elected to head for a meeting with Keri somewhere along the trail toward Glade Park.  She couldn’t explain her location, so we were on a search and find mission.  On the radio, we were still hearing bits and pieces of what had been found down on Granite Creek.  The broken radio reception didn’t sound all that bad, so we did a quick turnaround and headed down Lost Horse Canyon on the way to Granite Creek Canyon.

After about 8-miles of travel, we stopped at the “homestead” and glassed a pickup that could be seen on the shelf road exit from the canyon bottom.  Even with drone flyover pictures, the overall predicament with the truck could not be determined, so up the road we went.

Just a short walk around a corner from the pickup was a serious rockfall blocking forward progress.  A quick look and some thoughts about it made me think we “could” move the big rocks enough to pass, but taking the walk around the corner made the effort fade into oblivion.  Not only was there another large rock partially blocking the road, but also a disabled pickup with unbelievable body damage and what appeared to be a broken front axle sat smack in the middle of the road.  Game over!

Back out through Granite Creek Canyon and Lost Horse Canyon to the road to Glade Park.

Overall, it was a good (long) day of Jeeping.  Many in the group saw some new country and trails they had never traveled, so all was not lost.  One of the Rock Junction favorite trails is again useable and we only had one and a half casualties.  I forgot to mention that Dick aired down two tires TOTALLY.  Whoops!!

This should give you some ideas of what can be done for motorized trail access “IF” someone takes the lead and follows through.  Of course, having support from other people makes this happen easier, but that all-important “point man” is VITAL to things like this!  Are YOU that person?

One last thing… always remember when you come to a fork in the road, Yogi said; “Take it!”  That is the first step to finding opportunities.

Wednesday, March 13, 2019

WINCHING - Choosing the Right Winch and Accessories - Part 2

Winching

Choosing the Right Winch and Accessories

By Jerry Smith

Part 2


In part one of this series, we talked about how to make your electric winch more efficient.  In part 2, we’ll give you some tips on how to choose the right winch for your rig.

One of the first things you need to know about buying a new winch is the loaded weight of your rig as it will generally be out on the trail.  This will include any passengers, a full tank of gas, any tools, camping gear, spare parts, coolers full of ice and food, and anything else you normally will carry.

If you’re really anal about this step, you can find a certified scale at a truck stop or local dump to weigh the vehicle.  Estimating the added weight is not all that hard and you can find the gross vehicle weight in the owner’s manual or sometimes on the driver’s door.

Take the gross weight number you come up with and multiply it by 1.5.  You want a winch that can pull a minimum of 1.5 times the gross vehicle weight or more on a single line pull.

Here is an alternative if your budget is and will be short of what you need for a full-size winch.  Take the gross vehicle weight and divide it by two.  Find a winch that can pull that weight plus a little.  Then outfit it like we showed in part one with the welding cable hot wire and short rope to keep the layers to no more than two.  But don’t stop there.

This winch will pull you out of many places just like you have it now.  But if you’re bogged down in mud or on a hard pull of another kind, you’re going to need some winching know-how and some accessories.  In this instance, at least one snatch block.

As responsible 4-wheelers, we always want to do things with safety being the first order of business.  That requires some gear that did not come with your winch.

Gear like a good way to connect your winch line to a strap or other gear.  That normally will be a D-ring or one of the newer Rope Shackles.  You may get away with carrying only one of these for a while, but if you wheel in difficult situations long, you will require more than just the one.  I have carried a minimum of 4 of these and usually more.

Next, you’ll want a quality snatch block.  Why do I say quality?  I have seen the cheap ones fail and they NEVER fail at a good time… only when you need them most.  I like them rated for at least 4 to 6-times my gross vehicle weight.
That will put one at about 30,000# minimum.  Also, the larger the diameter of the snatch block pulley, the better.  There will be less drop in your line pull with larger pulleys. 

For most of you, one snatch block will be enough.  I carry two or three most of the time and have needed more a couple times.  When you need to change directions of pull more than one direction, you’ll need two most of the time and a third in the odd time.

I have needed three-winches, six snatch blocks, and a bucket of D-rings on each of two recoveries of other vehicles.  Another reason you don’t go wheeling alone.  Being short one D-ring to do a pull is like not having a winch at all.  Don’t be bashful about carrying extras.

Always carry at least a non-kinetic towrope or strap.  You can use it as a tree strap if you don’t carry one, and it becomes a multi-use tool.  I like to have at least a tree strap and one tow rope/strap for the odd time I need the extra length or need to attach to two trees.

Two trees are not out of the question.  I’ve needed to tie the rear of my Jeep to a tree or another vehicle to hold it so I could pull another vehicle on ice or mud several times.

If you use a wire rope winch cable, you’ll want a dampening blanket or coat to place over the cable to absorb the energy it will have should it break.  You do NOT want a winch cable breaking without a dampener.  They have killed and severely hurt people.

Gloves are especially needed with wire rope, but even a synthetic rope will have little skin-snagging objects embedded.  You’ll only want to learn about this once before you will ALWAYS WEAR GLOVES.

Those are some of the minimum accessories you’ll want/need.  We will discuss others in the third part of this series.

Following with the “safety” line of doing things, here are some tips that you’ll want to practice.

Unless you upgrade to some of the more expensive winch accessories, you will have a hook on the end of your winch line.  Do you know how to properly use it??  There IS a right and wrong way you know?

When hooking a winch line with a hook to any kind of anchor point, always, always have the hook pointing UP.  The easy way to remember this is that you “hook up” the winch line.  The hook is almost always your weakest point.  Should it break off, you want to direct the energy down toward the ground.  With the hook in the up position, any energy in that line is going to be directed down.  With the hook down, it directs the energy upward and the line flies around.

When winching, try very hard to have the winching vehicle pointed directly at the anchor or vehicle being pulled.  You do this so the winch line has a better chance of winding in level on the drum.

When you pull from other than a straight line, the winch line will tend to bunch on one side of the drum and eventually it will bind.  You’ll only do this once.  Pulling a bound up winch line back off a drum is not fun.  In severe cases, you may need to hook to another vehicle and have it pull the line free.

Safety wise, you NEVER, EVER step over a winch line under tension.

If you must step over a slack winch line, put one foot over the line on the ground so it cannot suddenly be tensioned and whack you in the crotch. (Think about it)

Learn the correct winching hand signals.  Using universal crane and rigging signals is the best practice. 

Stay clear of the winch line when pulling.  Keep others back farther than the line potentially could fly should it break.  Raising the hood is also a good way to protect the windshield and driver.

Always wear gloves… preferably leather.

Walk around the entire problem before setting up for a winch pull.  Study it from all angles.  Think about how to hook all your accessories… exactly.  Then think about how you expect the winched object to move.  Will it have a driver?  Will it roll freely once off the obstacle?  What is going to stop it?  Is it in park and/or the park brake set?

What will happen if things don’t go as planned?  Plan for that! 

What if the rope breaks?  What if the anchor pulls free?  What if the vehicle won’t budge?  Anticipate every “what if” and a few you didn’t think of.

The owner/driver of the vehicle in trouble has the final decision… ALWAYS.  That doesn’t mean others cannot veto the operation and walk away.  The person with the most to lose must have the final say.  Hold a short planning meeting.  Ask for feedback from others and decide which procedure makes the most sense.  Defer to someone with experience if you can trust them.

I’ve had many, many experiences, but by LISTENING in certain instances, a better plan than my own was used.  Nobody knows it all and you may miss something another sees.

In part 3, we will discuss some accessories to allow your winch to do what it was made for and why you bought it.